The uniquely designed CUBAN loudspeakers are flush-mounted In-Ceiling or In-Wall speakers, which provide high quality, wide-dispersion with a high efficiency while remaining as discreet as possible. They answer to the need with its ability of generating a great sound with very little power. In fact, the Cuban speakers can generate a sound from solid surfaces by utilizing only 3 to 25 Watts. A built-in self resetting protection circuit guarantees a long lifetime without any loss of quality and power.
The CMT500 is an acoustic reference microphone with an omnidirectional pickup pattern based on a small & accurate back elektret condenser capsule.It is especially designed to be used for all kinds of measurement applications, such as noise monitoring purposes, room acoustic measurements or speaker measurements.
The ATU44 is a universal input adapter which can be used for a wide varity of connections and extensions.
It can be used for coverting any loudspeaker level into a balanced or unbalanced Line level signal. It has inputs for 100V, 70V, 50V, 33V and standard 8 Ohm low impedance speaker signals.
The CMX705 is an omni-directional clip-on ear microphone designed for vocal and speech applications. Thanks to the flat frequency response characteristic which guarantees high fidelity sound reproduction, voices will be reproduced in a natural way
The SX408A is an active powerful tandem ported 100W subwoofer with a special constructed 8" driver that is capable of producing an incredibly powerful and clear bass sound. It’s frequency response is as low as 37 Hz at -10 dB, and the frequency characteristic is very flat from 37 Hz to 120 Hz. This way, the sound coming from this piece of equipment is absolutely magnificent. It contains an integrated class H amplifier, which ensures a high efficiency level with very low distortion. This amplifier delivers an output power of 100 Watt to the subwoofer. Besides this, it also contains an active crossover network with a frequency of 120 Hz, and two output channels for powering satellite loudspeakers. The two amplified satellite outputs deliver a maximum power of 2 x 100 Watt at 8 Ohm or 2 x 160 Watt at 4 Ohm. The minimum load is 4 Ohm
The CSA506 is a budget friendly ceiling speaker with a 5" cone, capable of producing a power of 6W. It ensures a good reproduction of speech and background music. It is fitted with a 100V line transformer with power taps for 6W and 3W to be used in large 100V PA systems.
The CTR24 is an 100 Volt line transformers for impedance matching between loudspeakers and amplifiers. The CTR series are especially suited for all ceiling applications.They are used for converting low impedance speakers allowing them to be used in 100V PA installations where long cableruns can be used.
This elegant combination is recommended for meeting rooms, board rooms, small places of worship and for placing next to flatscreens or projection screens. This set incldes 1 SX408A Active Bass Cabinet and 2 Axir column speakers. Available in Black /B or White /W. The unit can be externally controlled using the optional AUDAC VC4008 connector.
This elegant combination is recommended for meeting rooms, board rooms, small places of worship and for placing next to flatscreens or projection screens. This set incldes 1 SX408A Active Bass Cabinet and 2 Axir column speakers. Available in Black /B or White /W. The unit can be externally controlled using the optional AUDAC VC4008 connector.
The D3 is a professional power amplifier which can deliver a power up to 2 x 450 Watt @ 4 Ohm, and is suitable for most common low impedance high power sound systems. The D series are designed as no-nonsense amplifiers with only the necessary controls and connectors. This creates great simplicity in use and installation.
The DPA series amplifiers are Class-D power amplifiers designed to meet the specialized needs of sound contractors for Multi-Zone distributed speaker systems. They are designed in six different models of Class D power amplifiers, divided in three different architectures to meet the requirements for all kinds of applications.
The DPA series amplifiers are Class-D power amplifiers designed to meet the specialized needs of sound contractors for Multi-Zone distributed speaker systems. They are designed in six different models of Class D power amplifiers, divided in three different architectures to meet the requirements for all kinds of applications.
The SX12 is compact light-weight subwoofer cabinet with a power of 200 Watt RMS. It consists of one dual coil 12" woofers with a power of 100 Watt RMS, and two separate passive crossover networks with a frequency of 150 Hz. The input connection is made with a 4 pole speakon connector, containing both left and right audio channels.
Every channel is fitted with a passive crossover network whereof the LF output is connected to one of the 12" LF drivers. The connection for the Mid-High frequency drivers is made at the back of the cabinet with two 2-pole speakon connectors.